The M3200 Hi-Li Amplifier is no longer being manufactured, however you can still find support documents below or by contacting a Montalvo Applications Specialist.
Product Support
- Downloads
- FAQ
- Datasheet – M-3200 Hi/Lo (401.4 KB)
- Manual & Calibration Instructions – M-3200 Hi/Lo (155.7 KB)
What outputs are available on these amplifiers?
0-10VDC, 0-100 microamps, 4-20mA.
Can I use foil gauge load cells with this amplifier?
No.
Will this allow me to use two different web paths?
As long as the direction of force due to tension are both in the same direction.
How do I calibrate this amplifier?
Consult the Calibration Instructions for the M3200 Hi/Lo.
How do I test output?
Use a digital multimeter capable of measuring 4-20 mA.
How do I install this amplifier?
It just snaps onto any standard 35mm Din Rail. Consult the Calibration Instructions for the M3200 Hi/Lo for correct wiring.
How do I change the Dipswitch?
Carefully remove the side cover and use a small screwdriver to slide the switches. Consult the Calibration Instructions for the M3200 Hi/Lo.
How do I connect my load cells to the amplifier?
Consult the Calibration Instructions for the M3200 Hi/Lo for correct wiring.
How do I calibrate the amplifier?
Consult the Calibration Instructions for the M3200 Hi/Lo..